Product Overview
Cutting Board Display Laser Ready Engrave Cut File with Optional Topper | Glowforge Cutting Boards Craft Fairs Display Step Laser Engraved
Tested on 1/4" Home Depot Maple (I would NOT recommend less than 1/4") and Sized at approximately: 10"w x 14" Deep and 9.5" High. Base and Supports fits on one 12x20 board. Slots are set at .19" for good snug fit. **Update 10/12/21 - There is an additional option of .22" slots for those using a thicker 1/4 board. As always, please caliper your material as you may need to adjust for your actual material. Optional Topper Display can be cut out of 1/8" wood to save $$. Please see photo of exact files provided. ****All our Files are tested on our 45w Muse Core Laser ****
♥ PLEASE NOTE: All files are sold for PERSONAL USE ONLY. Please see below if you would like to sell items using our designs.
♥ ♥ ♥ YOU RECEIVE: the following files/formats (three ZIPPED files containing all file formats) including:
3 x SVG Files
3 x DXF Files
3 x EPS Files
3 x PDF Files
Color Code Guide:
Red= CUT
Blue = SCORE
Black = Engrave
♥ PLEASE NOTE: Any designs including a Slot, you may need to adjust the slots of this stand to fit the material you are cutting! The file and photo shown were made using 1/4" Home Depot (not true 1/4") birch plywood. The thickness will vary for you, so make sure to measure your material before you cut to adjust your slots.
All watermarks are removed upon purchase.
All files sold are for personal use only. Please read the Terms of Use before purchasing.
No fonts/writing are editable. All fonts have been converted to outlines/artwork.
